Here are three things, which should be paid attention to during daily inspection and maintenance:

The first step - open the back panel of the bumper and check, Whether the wiring is connected Bamperer cars on batteries To brake blocks. Examining the wiring of the car bumper, Remember, that don't pull too fast, In order not to break a thin wire. Then turn the car and check, Are there any road parts by car. If the wire is disconnected, Weakens or damaged, Grounding may occur. Therefore, you should carefully check during a daily inspection.

Pay attention, that some manufacturers bumper machines For security reasons, all wires on the production line are disconnected before, how bumper cars will leave the plant. Ensure the safety of bumper machines during transportation.

The second step - check, that all equipment is safe and works properly. You need to check these amenities, including, Among other things, The main power switch, Installation of time, Launch of the bamperer machine, pressing the control switch to handles, as well as driving and stopping the vehicle.

The third step - check, Is the battery discharged, and then charge it. Charging time is at least 6 hours and no more 12 hours. During charging, it is necessary to monitor that, so that there are no dangerous objects nearby, To avoid other accidents. And there is no need to put the battery in the car when charging, In order not to cause a fire. The battery is heated during charging, Therefore, you need to open the car cover, to provide good ventilation during charging. Be careful, Do not fold a few chargers together.