Skirt bumper car with floor the grid should take into account stability, Durability and good electrical conductivity. In the design of the floor of the bumper car, produced by our factory, As a supporting base, a wooden structure is used, and steel plates are used as the upper structure.

• Wooden supports are usually made of strong wood. For example, hard wood or processed pine. These materials should withstand weight, and also have some resistance to a humid environment.

• The supporting structure may consist of several wooden beams, crossing the design. They form a lattice frame, which provides a strong base for steel panels.

• The support layers of wood are also developed taking into account ventilation and drainage, To guarantee, that water or moisture does not accumulate under the floor. Keep the structure dry and resistant to corrosion.

• Steel The plate is an important part of the conductive layer. It should not only have excellent electrical conductivity, but also should be strong enough, to withstand the collisions of vehicles and the actions of passengers.

• The surface of the steel plate can have anti -slip processing for additional safety. It is also covered with anti -corrosion coating, to extend the service life of the floor.

• Steel plates are connected by welding or bolts, to ensure the continuity of the entire floor structure. In the conductive zone there will be accurate insulation and wiring, forming a complex network, by which the car will receive electricity.

• Usually under the floor there is an isolation tape to divide the positive and negative poles in order to avoid short circuits, caused by direct contact. The bumper machine receives energy by contacting the conducting areas with alternating positive and negative electrodes through the device for receiving energy at the bottom.

• To ensure safe and reliable power supply into steel plate structures, insulating materials or insulating gaskets can be built -in, used between conducting and non -conducting areas.

The entire floor structure is fully consistent with the current standards and safety rules, including the requirements of electrical safety and fire protection. You can be calm. Besides, Daily care for the floor is important. You will need to serve it daily, To guarantee, that he is always in good working condition. In addition, you will need to conduct regular checks of a wooden structure and steel panels, as well as testing the mains. Ensure stability and security of the power supply system.